![background image](http://html1.mh-extra.com/html/eaton/emr-3mp0/emr-3mp0_installation-operation-and-maintenance-manual_3982316022.webp)
1.2.1
Catalog Codes for the EMR-3MP0
Motor Relay
EMR-3MP0
‑2
#
#
#
#
#
Choose from the following options.
↑
↑
↑
↑
↑
Hardware Option 1
4 DI, 4 Outputs, Removable Terminals, 1 4…20 mA
Analog Output, URTD interface, IRIG‑B, small display.
A
Hardware Option 2
Standard CT input terminals with shorting block:
Phase Current 1 A / 5 A, Ground Current 1 A / 5 A,
Power Supply Range: 19…300 Vdc, 40…250 Vac.
0
MP‑3000-compatible CT input terminals:
Phase Current 5 A, Ground Current 5 A, Power Supply
Range: 19…300 Vdc, 40…250 Vac.
9
Communication Options (see also
“Communication Protocol Codes”
)
No communication protocol
A
Modbus RTU + DNP3.0 RTU (RS485 / terminals)
B
Modbus TCP + DNP3.0 TCP/UDP (Ethernet 100MB /
RJ45)
C
Profibus-DP (Fiber optics interface, ST Connector)
D
Profibus-DP (RS485 / D-SUB interface)
E
Modbus RTU + DNP3.0 RTU (Fiber optic interface, ST
connector)
F
Modbus RTU + DNP3.0 RTU (RS485 / D-SUB interface)
G
IEC 61850 + Modbus TCP + DNP3.0 TCP/UDP
(Ethernet 100MB, RJ45)
H
Modbus RTU + DNP3.0 RTU (RS485 /
terminals) + Modbus TCP + DNP3.0 TCP/UDP
(Ethernet 100MB, RJ45)
I
IEC 61850 + Modbus TCP + DNP3.0 TCP/UDP (Fiber
optic interface, LC connector, 100MB)
K
22
www.eaton.com
EMR-3MP0
1 EMR‑3MP0 Motor Protection Relay
1.2 Information About the Device