![background image](http://html1.mh-extra.com/html/eaton/emr-3mp0/emr-3mp0_installation-operation-and-maintenance-manual_3982316200.webp)
5.2
Fault Recorder
Purpose of the Fault Recorder
The Fault Recorder provides compressed information about faults (e.g. Trip Causes). The
compressed information can be read also at the HMI. This might be helpful for fast fault
analysis. After a fault, a pop-up window will be sent onto the display in order to draw the
user's attention to the fault. The Fault Recorder will provide information on the causes of
the fault. A detailed fault analysis (in oscillographic form) can be done by means of the
Waveform Recorder. The reference between the Fault Records and the corresponding
Waveform (Disturbance) Records are the »Fault Number« and the »Grid Fault Number«.
Times and Durations
Operational
Ph OC Trip
Gnd OC Trip
Ph Inst Trip
Gnd Inst Trip
Pickup
Bkr Failure
Maint. Mode
Info
Ack/Rst
Ok
CTRL
Prot . Pickup
Signal: General Pickup
t
t
0
1
0
1
Time to trip
t
0
1
Analog values (recording)
0
0
Popup pops up on the display.
t-meas-delay=0
Fault duration
0
Capture Data
Prot . Trip
Signal: General Trip
t-meas-delay>0
Capture Data
E_F49
Fig. 49: Fault Recorder: times and durations.
200
www.eaton.com
EMR-3MP0
5 Recorders
5.2 Fault Recorder