![background image](http://html1.mh-extra.com/html/eaton/emr-3mp0/emr-3mp0_installation-operation-and-maintenance-manual_3982316243.webp)
Time Synchronization IRIG-B00X
Nominal input voltage:
5 V
Connection:
Screw-type terminals (twisted pair)
RS485*
*availability depends on device
Connection:
9-pole D-Sub socket (external terminating
resistors/in D-Sub)
or 6 screw-clamping terminals RM 3.5 mm (138
MIL) (terminating resistors internal)
CAUTION!
In case that the RS485 interface has terminals, the communication cable has to be
shielded.
Fiber Optic*
*availability depends on device
Master/Slave:
Slave
Connection
ST plug
URTD-Interface*
*availability depends on device
Connector:
Versatile Link
Boot Phase
After switching on the power supply the protection is available in approximately 6
seconds.
After approximately 15 seconds (depending on the configuration) the boot phase is
completed (HMI and communication initialized).
243
www.eaton.com
EMR-3MP0
10 Technical Data EMR-3MP0