![background image](http://html1.mh-extra.com/html/eaton/emr-3mp0/emr-3mp0_installation-operation-and-maintenance-manual_3982316137.webp)
4.2
Motor Starting and Control Module
General – Principle Use
The motor start control logic is the core control and protective function for a motor
protection device. The logic comprises:
• Motor Operation States (
╚═▷ “4.2 Motor Operation States”
)
• Motor Start Control (
• Motor Start Blockings (
)
• Motor Start / Transition Trips (
╚═▷ “Motor Start / Transition Trips”
)
• Motor Cold / Warm Detection (
• Emergency Override (
)
NOTICE!
Whenever changes are made to the settings of protection parameters all protection
functions, including the »MStart« module, get restarted. (See the “Configuration change”
Notice in
.) This resets the motor operation state back to »Stop« even if
the motor is running all the time.
Afterwards, in case the motor is running the »MStart« module goes through the complete
starting process (»Stop« → »Start« → »Run«) again, but without increasing the start
counters. The timers, however, and the thermal model are reset.
However, since a change of settings generally requires a new commissioning test it is
very unlikely that this behavior affects existing applications.
Motor Operation States
MotorStart_F01
START
TRIP
RUN
STOP
OFF
BLOCK
From Other Trip Modules
The basic motor operation states can be classified as four states that include:
• Start cycle;
• Run cycle;
• Stop cycle;
137
www.eaton.com
EMR-3MP0
4 Protective Elements
4.2 Motor Starting and Control Module