5
Compass
Installation Manual
COMPASS INSTALLATION MANUAL
www.eaton.com/compass
Corner Worksurface
Corner worksurfaces attach between corner leg
and two legs supported by two included stretchers.
Corner worksurfaces can be used to create stand-
alone desk or connect flanking worksurfaces of same
depth.
Corner worksurfaces are available in left hand widths
(W1) and right hand widths (W2) of 24 to 72 inches
in 6 inch increments. Widths W1 and W2 can be
different. Corner worksurfaces have symmetrical left
and right depths (D) of 18, 24, 30 inches.
Maximum corner worksurface width is 48 x 72 or
72 x 48 inches.
•
Corner worksurface item numbers describe two
widths and last number indicates depth (1=24
inches, 2=30 inches, and 5=18 inches). For
example, CWC48602 is 48 inches wide on left side,
60 inches wide on right side, and 30 inches deep
on ends.
•
CWC60485 is corner worksurface 60 inches wide
on left side, 48 inches wide on right side, and 18
inches deep on ends.
Corner Transition Worksurface
Corner transition worksurfaces attach between
corner leg and two legs supported by two included
stretchers. Corner transition worksurfaces connect
flanking worksurfaces of different depths.
Corner transition worksurfaces are available in left
hand widths (W1) and right hand widths (W2) of 24 to
72 inches in 6 inch increments. The deeper end has
depth (D) of 24, or 30 inches. The shallower end has
depth of 6 inches less (D-6) of 18 or 24 inches.
Maximum corner worksurface width is 48 x 72 or
72 x 48 inches.
•
Corner transition worksurface item numbers
describe two widths and deeper end (R=right and
L=left). For example, CWCT4860R is 48 inches
wide on left side, 60 inches wide on right side, 30
inches deep on right end and 24 inches deep on
left end.
•
CWCC6048L is corner transition worksurface 60
inches wide on left side, 48 inches wide on right
side, 18 inches deep on right end and 24 inches
deep on left end.