6
Compass
Installation Manual
COMPASS INSTALLATION MANUAL
www.eaton.com/compass
Peninsula Worksurface
Linear worksurfaces attach between two legs
Peninsula worksurfaces attach between two legs
supported by included stretcher, and included
peninsula leg. Peninsula worksurfaces can be attached
on one side or both sides to any linear or corner
worksurface.
•
Peninsula worksurfaces are available in widths (W)
of 24 or 30 inches, and depths (D) of 48, 60, or 72
inches.
•
Peninsula worksurface item numbers describe the
width and depth. For example, CWP3048 is 30
inches wide with peninsula depth of 48 inches.
Jetty Worksurface
Jetty worksurfaces attach between two legs
supported by included stretcher, and included
peninsula leg. A jetty can be used at end of any 24
or 30 inch deep worksurface. Exterior end of a jetty
is designed to be end of a workspace and does not
connect to any other worksurface.
Jetty worksurfaces are available in width (W) of 48
inches, and connecting depths (D1) of 24 or 30 inches
and overall depth (D2) of 72 inches. The distance
between standard legs is about 14 inches less than
overall width.
•
Jetty worksurface item numbers describe width,
overall depth, connection depth (1=24 inches and
2=30 inches), and orientation (R=right and L=left).
For example, CWJ48721R is 48 inches wide, with
connecting depth of 24 inches, and jetty depth of
72 inches on right side.
•
CWJ48722L is 48 inches wide, with a connecting
depth of 30 inches, and an overall depth of 72
inches on the left side.
Conference End Worksurface
Conference end worksurfaces attach between two
linear or corner worksurfaces and are supported by
included peninsula leg.
Conference ends are available in 48 and 60 inch
widths (W) to connect two 24 inch deep or two 30
inch deep (D) worksurfaces. Conference ends are half-
circles, so depth (D) is half width (W).
•
Conference end worksurface item numbers
describe width (W) which is equal to combined
depth of two adjoining worksurfaces. For example,
CWCE48 is 48 inches wide and 24 inches deep.