12
Compass
Installation Manual
COMPASS INSTALLATION MANUAL
www.eaton.com/compass
Overhead Compartment Shell
Overhead compartment shells attach to the
uppermost section of 36 inch uprights or 65 inch
legs. Overhead compartment shells include back, top,
bottom, and side panels. Bottom panels are slotted
to support optional dividers. Overhead compartment
shells can be finished with flipper doors or cabinet
doors, which must be ordered separately.
Overhead compartment shells are available in widths
(W) of 24 to 72 inches in 6 inch increments, a depth
(D) of 16 inches, and a height (H) of 16 inches.
Compartment shells of 60 to 72 inches wide include a
center shell partition.
•
Overhead compartment shell item numbers
describe the width and location (L=linear and
C=corner). For example, CLCS72L is a 72 inch
linear overhead compartment shell.
•
CLCS48C is a 48 inch corner overhead
compartment shell. Corner applications can use
only one overhead compartment shell on the left or
right side.
Flipper Doors
Flipper doors attach to the front of an overhead
compartment shell. Flipper doors open outward and
slide over the top of the compartment shell to stay
in the open position. Flipper doors include locks and
all required mounting hardware, and are available in a
variety of finishes.
Flipper doors are available in widths (W) of 24 to 72
inches in 6 inch increments and a height (H) of 16
inches. Two flipper doors are provided for widths of 60
to 72 inches.
•
Flipper door item numbers describe the width and
location (L=linear and C=corner). For example,
CDF72L specifies two flipper doors that attach to a
72 inch linear shell.
•
CDF48C is a flipper door that attaches to a 48 inch
corner shell. Corner applications can use only one
overhead compartment shell and one set of flipper
doors on the left or right side.