13
Compass
Installation Manual
COMPASS INSTALLATION MANUAL
www.eaton.com/compass
Cabinet Doors
Cabinet doors attach to the front of an overhead
compartment shell. Cabinet doors include side
stiffeners, hinge plates, hinges, bumpers, door
handles and all required mounting hardware.
Cabinet doors are available with optional locks and a
variety of finishes.
Cabinet doors have a height (H) of 16 inches, and
various widths determined by the overall width (W)
of the compartment shell. Widths of 24 to 42 inches
require 2 doors. Widths of 48 to 54 inches require 3
doors and an intermediate shell partition. Widths of 60
to 72 inches require 4 doors and use the center shell
partition already included with the compartment shell.
The back of each cabinet door is etched with the
modular width of the overhead compartment
shell. For linear applications the door set is labeled
24, 30, 36, and so on. For corner applications the
door set is labeled 20, 26, 32, and so on; 4 less
than the comparable linear set.
•
Cabinet door item numbers describe the width
and location (L=linear and C=corner). For example,
CDC24L specifies cabinet doors that attach to a 24
inch linear shell and includes 2 cabinet doors and 2
side stiffeners.
•
CDC48C specifies cabinet doors that attach to
a 48 inch corner shell and includes 3 doors, an
intermediate shell partition, and 2 side stiffeners.
Corner applications can use only one overhead
compartment shell and one set of cabinet doors on
the left or right side.
•
CDL72L specifies cabinet doors that attach to a 72
inch linear shell, and includes 4 cabinet doors and
2 side stiffeners. The required center shell partition
is already included with the 72 inch overhead
compartment shell.
Linear Storage Shelf
Linear storage shelves attach between 36 inch
uprights or 65 inch legs, 20 inches above the
worksurface. Linear shelves use two end support
brackets to connect to uprights.
•
Linear storage shelves have a depth (D) of 12
inches and are available in widths (W) of 24 to 72
inches in 6 inch increments.
•
Linear storage shelf item numbers describe the
width and location (L=linear and C=corner). For
example, CSL72L is a 72 inch linear shelf.
CSL48C is a 48 inch shelf for one side of a corner.
Corner applications can use a linear shelf on the left
or right side designated by a “C”, or a corner shelf as
described in the following section.