manualshive.com logo in svg

Eaton Compass, Руководство по установке, Страница: 21 / 62

Поделиться
Скачать
Eaton Compass Скачать руководство пользователя страница 21

17

Compass

Installation Manual

COMPASS INSTALLATION MANUAL

         www.eaton.com/compass

Order of Installation

  1.   Prepare the staging and installation areas.
  2.   Unpack components and component kits. Verify 

inventory.

  3.  Install legs, stretchers, and modesty panels.
  4.   Install organizer uprights, alignment connectors 

and organizer panels.

  5.   Install overhead shelves, compartments, and 

doors.

  6.   Install worksurfaces, tie plates, and transaction 

shelves.

  7.  Level and align installed components.
  8.  Install data and electrical cabling.
  9.  Install drawers, accessories, and lighting.
10.  Install wire way covers and top caps.

Best Practices

•   

Work in teams of two or more people to install 

Compass components.

•   

Compare the installation plan with the bill of 

materials to make sure all the required components 

are present.

•   

Do not attempt to install more than one workspace 

at a time. Stagger large installations to facilitate 

leveling and alignment.

•   

When connecting multiple components, assign one 

leg as the “anchor” and work outward from that 

location.

•   

To maintain structural integrity do not use transition 

legs at the end of unsupported worksurfaces.

WARNING

Components can become unstable during assembly. 

Use caution when installing overhead compartments 

and shelves.

Содержание Compass































































Отзывы:

Нет отзывов