9
Compass
Installation Manual
COMPASS INSTALLATION MANUAL
www.eaton.com/compass
Non-Joined Transition Leg
Non-joined transition legs are available in heights (H)
of 29 and 65 inches and modular depths (D) of 18, 24,
30, or 36 inches. Both 29 and 65 inch legs support
worksurfaces at 29 inches.
Legs of 29 inches in height support organizer uprights
of 12, 16, 20, and 36 inches. Legs of 65 inches
in height can be considered a 29 inch leg with an
integrated 36 inch upright.
To ensure structural integrity, a non -joined
transition leg can not be used alone at the end of
a worksurface.
•
Non-joined transition leg item numbers describe
the modular depth, overall height, and orientation
(R=right and L=left). For example, non-joined
transition leg item number CLT3065R supports a 30
inch wide worksurface, is 65 inches in height, and
attaches to the right side of a worksurface.
•
CLT2429L is a non-joined transition leg that
supports a 24 inch wide worksurface, is 29
inches in height, and attaches to the left side of a
worksurface.