Easson ES-12, Инструкции по эксплуатации

Страница: 90 / 122

Anytime the operator want to check or verify if the DRO's INCL calculation correct or not, or want to
temporarily exit the INCL machining mode display ( swap back to normal XYZ display ), procedure
are as follows :
INCL machining mode display
temporarily return to
XYZ coordinate display
presently in the temporarily
XYZ coordinate display
presently in INCL function cycle
temporarily swap to normal
XYZ coordinate display
swap back to INCL
function cycle
swap back to INCL machining mode display continue the cone measurement operation
After the INCL machining operation completed, press to exit from the INCL function cycle.
exit INCL function, return to
normal display
presently in INCL cycle
INCL function - cone measurement
- A. 11-
X
Y
Z
ABS X=0 ANG-20.00
0.000
0.000
0.000
Z
X
INCL.
X
Y
Z
ABS X=0 ANG-20.00
0.000
0.000
0.000
Z
X
INCL.
X
Y
Z
ABS X=0 ANG-20.00
0.000
0.000
0.000
Z
X
INCL.
X
Y
Z
ABS XYZ - ABS.
0.000
Z
X
INCL.
-78.560
12.345
X
Y
Z
ABS XYZ - ABS.
0.000
Z
X
INCL.
-78.560
12.345
X
Y
Z
ABS
mm
mm
mm
-78.560
45.675
12.345