Easson ES-12, Инструкции по эксплуатации, Страница: 14 / 122

X
Y
Z
ABS
mm
mm
mm
12.345
45.785
SU - 1
102.570
X
Y
Z
ABS
mm
mm
mm
12.345
45.785
SU - 1
102.570
Basic Functions - XZ/YZ Axes Summing
- 7 -
This function available only when the 3 Axes DRO configured to DRO TYPE = LATHE
Purpose : The Axes Summing function is a useful function for LATHE application.
ES-12 provides the axes summing function for providing temporarily summing display of XZ
and YZ axes, operator can swap back to the orginal displays ( X/Y/Z individual display with no
summing of axes ) at any time they want.
The summing function is useful when two linear scales are installed on the cross slide of lathe.
The summing function allow the operator to have direct combined reading of these two linear
scales for the tool tip positioning, this make machining more easier and less mistake.
Example : To get the summing display of X and Z axes
( the same operation if we want summing the Y and Z axes, if we want YZ summing, just replacing
the X axis button key press with Y axis button key press as per following example. )
Z
enter the Z axis function
X
press X axis button key
SU-1: Summing axis 1( X )
SU-2: Summing axis 2( Y )
In the axes summing display mode, the Z axis will
turn off to avoid possible confusion to the operator.
Message "SU-1" or "SU-2" to let the operator know
which axis have summed with Z axis.
Axes summing display
X
Y
Z
ABS
mm
mm
mm
56.785
12.345
45.785
X
Y
Z
ABS
mm
mm
mm
56.785
12.345
45.785
X
Y
Z
ABS
mm
mm
mm
56.785
12.345
45.785
ENTR. VAL
X
Y
Z
ABS
mm
mm
mm
56.785
12.345
45.785
ENTR. VAL
Please notice that when the display is in axes summing mode, all DRO functions are temporarily
disabled to avoid confusion and mistaken operation !!
ce
To exit from Axes summing display mode, return to normal X/Y/Z display, press
ce
Axes summing display normal X/Y/Z display mode