Easson ES-12, Инструкции по эксплуатации

Страница: 38 / 122

X
Y
Z
ABS Y=0 ANG-20.00
0.000
123.550
0.000
Y
X
INCL.
- 31 -
INCL - Inclined angle tool positioning
The DRO is now entered into the INCL machining function cycle
the datuming of the work piece at an inclined angle of 20 degrees is an iterative process, operations
are as follows :
zero the X axis
to redatum the
X axis
XY plane INCL machining
mode display
Y display is shifted left to
remind the operator that
the axis display zero
position is preset to
=
X * TAN( ANG )
operator simply move the
machine to Y = 0.000,
then the tool is accurately
located at the inclined
axis.
A )
ZERO the dial imdicator at one end of the work piece
after move the machine to
Y axis display = 0.000, then
Y axis position is accuractely
posited at the 20 degree,
operator can fine tune the
work piece's incline angle
until the dial indicator
pointing at ZERO
B )
Since during the work piece's incline angle alignment, angular adjustment of any one end of the work
piece will inevitably affect the position of the opposite end. Therefore, the above angular alignment
fine tunning procedure A) & B) have to be carried oit iteratively until operator satify with the angular
error of the alignment achieved.
iterate between A) &
B) until the alignment
error is within the
acceptable range
X
Y
Z
ABS Y=0 ANG-20.00
0.000
0.000
0.000
Y
X
INCL.