E.F. Johnson Company Viking VM600, Руководство по эксплуатации

Страница: 139 / 207

Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual 6-11
SMARTNET / SmartZone / P25 Trunked Features
2 If using the front panel controls, enter the ID of the radio you are calling by rotating the
select switch, pressing F3 (Standard Control Head) or right on the Navigation pad
(Lightning Control Head) to advance the cursor. The F2 button (Standard Control
Head) or left on the Navigation Pad (Lightning Control Head) can be used to move the
cursor back to correct an entered number. With the Digital Keypad microphone, enter
the number using the DTMF keypad. To cancel the call, press the Unit Call Option key
again.
Note
If the Unit Call option is programmed to either the F2 or F3 buttons on the Standard
Control Head, you must use the F6 button to exit the function.
3
Press the PTT switch to initiate the call. If the entered number is valid, the display
indicates the alias of the ID if it matches an ID in the call list. Otherwise, the ID you
entered continues to be displayed.
Events that may then occur are as follows:
- If the mobile being called is on the air, “WAIT” is displayed and ringing is heard
until the called party answers or for 20 seconds, whichever occurs first. Pressing the
PTT or an option switch stops the ringing but not the call. When the call is answered,
the voice of the called party is heard.
- If the called mobile does not answer within 20 seconds, a continuous tone sounds and
“NO ANSWER” is displayed.
- If the called mobile is not on the air, a continuous tone sounds instead of the ringing
tone and “NO ACK” (Standard Control Head) or “No Acknowledge” (Lightning
Control Head) is displayed.
- If the busy tone sounds and “BUSY” is displayed, the called mobile has answered the
call but the system is busy. When the system is no longer busy, the call back tone
sounds.
- If your radio or the called radio is inhibited or not programmed to make this type of
call or for the requested secure mode, “RSPNS ONLY” (Standard Control Head) or
“Response Only” (Lightning Control Head) is displayed and an alert tone sounds.
- If your radio does not have the proper encryption key, “KEYFAIL” is displayed and
the call must be made in the clear mode by pressing the Clear/Secure option switch
(if encryption is selectable on the channel). Otherwise, the correct key must be
loaded.
4
When the call is finished or is not answered, end it by pressing the Unit Call option
switch and placing the microphone back on-hook, or by pressing the appropriate exit
button.