E.F. Johnson Company Viking VM600, Руководство по эксплуатации

Страница: 58 / 207

Draft 02 - Sep 1 2015
3-14 Viking Mobile Radio Operating Manual
General Operation
To Send a Single Touch Unit Call
1 Press and Hold the Single Touch button assigned to Unit Call.
2 The Unit ID to call is displayed on the top line with the Alias displayed on the bottom
line.
3
To send the call, press the PTT button.
4
The operation will now continue the same as Unit Call.
5
To exit the call, either press the Clear button or the Single Touch button pressed for
entry.
To Answer a Unit Call Using Single Touch
1
When the radio is receiving an incoming call, press and hold the Single Touch button
assigned to Unit Call.
2 The PTT button must then be pressed to answer.
3 Once the PTT button has been pressed the operation continues the same as the normal
Unit Call.
4
To exit the call, either press the Clear button or the Single Touch button assigned to
Unit Call.
3.2.2.2 Conventional Call Alert
1 To use Call Alert, the Call Alert Encode option must be checked in Armada under Sys-
tems (Conventional) → General Options → P25 Conv System Options .
2
Without this checked a bad tone will sound on a press and hold.
3
To send a Call Alert, press and hold the Single Touch button assigned to Call Alert.
4
While sending the Call Alert, the Unit ID of the radio the alert is being sent to is
displayed on top along with the alias on the bottom line.
5 Once a Call Alert has been sent operation continues the same as the normal Call Alert.
6 To exit the call alert, either press the Clear button or the Single Touch button assigned
to Call Alert.
3.2.2.3 Conventional Status
1
To send a Status, press and hold the Single Touch button assigned to Status.