E.F. Johnson Company Viking VM600, Руководство по эксплуатации

Страница: 138 / 207

Draft 02 - Sep 1 2015
6-10 Viking Mobile Radio Operating Manual
SMARTNET / SmartZone / P25 Trunked Features
6.6.1 Answering a Page
To answer a Page:
1
When a page is received, five beeps sound and “PAGE RECVD” (Standard Control
Head) or “Page Receive” (Lightning Control Head) is displayed. The ID of the radio
paging you is stored as the last ID received.
2
To clear or ignore the page, press any option switch. If the PTT switch is pressed, a
group call is placed on the selected channel.
3 To answer the page as a unit call (see Section 6.4), press the Unit Call option switch,
soft button (Lightning Control Head), or select the menu parameter. The Call Response
button, soft button (Lightning Control Head only), or menu selection can also be used.
If the ID of the radio paging you is in the Call list, the display will toggle between the
Calling ID and the Alias. If not, only the Calling ID is displayed. Press the PTT switch
and respond.
4
When the call is finished or it could not be completed for some reason, end it by
pressing the Unit Call option switch and placing the microphone back on-hook, or by
pressing the appropriate exit button.
6.6.2 Initiating a Page
To initiate a page by recall from a list:
1
With a SMARTNET/SmartZone or P25 trunking channel selected, momentarily press
the CALL ALERT option switch. The tag (alias) of the last ID called is displayed.
CALL ALERT also can be selected from the menu and soft buttons (Lightning Control
Head only).
2 If required, rotate the Select switch to display the desired mobile. The tag of each
number is displayed.
3
Press the PTT switch and one of the following then occur:
- If five beeps sound, the system received the page and the paged mobile is on the air
and received it. The page mode is automatically exited.
- If the system received the page but the called mobile is not on the air, a single beep
sounds and “NO ACK” (Standard Control Head) or “No Acknowledge” (Lightning
Control Head) is displayed six seconds after the PTT switch is pressed. Auto exit then
occurs.
To make direct entry from the Menu (scroll down to select direct entry) or by using front
panel controls or Digital Keypad microphone.
1 Press and hold the Unit Call option key until a tone sounds (approximately one second).
The last ID called is displayed.