E.F. Johnson Company Viking VM600, Руководство по эксплуатации

Страница: 117 / 207

Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual 5-25
Conventional Mode Features
4 Briefly press the PTT switch to send the access code. A dial tone sound should then be
heard. Briefly press the PTT switch again to send the digits. Proceed to Step 5 (in next
steps):
For direct entry using front panel controls or the keypad on the Digital Keypad
microphone:
1
Select the conventional channel that is programmed to select the desired access and de-
access codes.
2
Press and hold the PHONE option switch until a tone sounds (approximately one
second). The alias of the last called telephone number is displayed if it is in the phone
number list. Otherwise, only the last eight digits are displayed. In addition, the phone
mode is indicated by the
icon (Standard Control Head) or on the Lightning
Control head..
3 If using the front panel controls, enter the telephone number by rotating and pressing
the Select switch. The 0-9,
*
, #, and P (pause) characters can be entered (# is displayed
as a “+”). Numbers up to sixteen digits (including pauses) can be entered, and the
number scrolls to the left in the display so that the eight right-most digits are always
displayed. With the Digital Keypad Microphone, enter the number using the DTMF
keypad (a pause indicated by “P” is entered by
*
#).
4
Briefly press the PTT switch to send the access code. A dial tone sound can then be
heard. Briefly press the PTT switch again to send the digits.
5 Press the PTT switch to talk and release it to listen. Since the radio operates half
duplex, it is not possible to talk and listen at the same time.
6
When the telephone call is finished or if it could not be completed for some reason, end
it by pressing the PHONE option switch again and placing the microphone back on-
hook. This sends the de-access code which tells the system that the call is finished and
that the repeater can be released.
5.13.8.3 Answering a Telephone Call
To answer a telephone call:
1 When a telephone call is received, “ringing” similar to a standard telephone is heard
and “PHONE” is displayed.
2
To answer the call, press the Phone option switch and press the PTT switch to talk and
release it to listen.
3 When the call is finished, end it as in the preceding Step 6.