E.F. Johnson Company Viking VM600, Руководство по эксплуатации

Страница: 194 / 207

Draft 02 - Sep 1 2015
9-4 Viking Mobile Radio Operating Manual
Tones & Error Messages
ATTACH_GPS “Attach GPS”
“ATTACH GPS”
“Attach GPS” This error indicates that the user has tried to enter GPS mode
without attaching the GPS receiver to the radio.
AUTHENTICATION_FAILED “Auth Failed”
“AUTH FAILD”
“Authent Failed” This error indicates the radio failed P25 Trunking
Authentication, which occurs during Unit Registration on
supported systems.
BAD_BAND “Bad Band”
“BAD BAND”
“Bad Band” The radio band in the parameter file does not match the radio
band in the tuning parameters. You will see this message if a
parameter file for the wrong band is downloaded to the radio.
This error is also indicated with 4 orange blinks of the LED.
BAD_ESN “Bad ESN”
“BAD ESN”
“Bad ESN” This error indicates that the ESN of the radio is not valid. This
error is usually only seen in the factory when first
programming brand new logic boards. This error is also
indicated with 12 orange blinks of the LED.
BAD_FILE_FORMAT “Bad File Fmt”
“BAD FF”
“Bad File Format” The parameter file has a newer file format version than what
matches the software in the radio. This error is indicated with
2 orange blinks of the LED.
BUSY “Busy”
“BUSY”
“Busy” This error indicates that a call has been attempted and the
system has responded that no channels are available for
assignment.
BUSY_TIMEOUT “Busy Timeout”
“BUSY TMOUT”
“Busy Timeout” This error indicates that the radio previously received a busy
response from the system and it has not received a channel
grant before the busy timeout timer has expired.
CLEAR_ONLY “Clear Only”
“CLEAR ONLY”
“Clear Only” This error indicates that the selected channel or group is
strapped clear only and that a secure call cannot be made.
COLD_BATTERY “Cold Battery”
N/A
N/A The portable’s battery has dropped below the “cold”
temperature threshold. Transmit is not allowed in this
condition.
CONTROL_HEAD_CONFLICT N/A
“CH ADDRESS
CONFLICT”
“CH ADDRESS
CONFLICT”
There are two control heads connected to the mobile that are
assigned the same address.
CORRUPT_PARMS “Corrupt Parm”
“CORPT PARM”
“Corrupt Parm” The parameters checksum or other data is corrupted. This
error will also be indicated with 5 orange blinks of the LED.
CYCLE_POWER “Cycle Power”
“CYCLE POWR”
“Cycle Power” There is a communication failure between the DSP and the
back end ADC on the RF deck. This error will also be
indicated with 8 orange blinks of the LED.
DATA_DENIED “Data Denied”
“DATA DENY”
“Data Denied” The Radio received a “Deny” response when trying to acquire
packet data service.
Message Enumerations
Portable/SCH/LCH
Strings Description