A
B
C
D
E
F
G
H
L
M
N
P
Impianto iniezione - accensione
Ignition - injection system
sezione / section
M 3
19
749R
- M.Y. 2006 - edizione/edition 00
Sensore temperatura
acqua
Il sensore è fissato al raccordo di
uscita acqua dalla testa orizzontale e
rileva la temperatura del liquido di
raffreddamento. Il segnale elettrico
ottenuto giunge alla centralina
elettronica e viene utilizzato per
effettuare le correzioni sulle
calibrazioni memorizzate nella Flash
Eprom, in modo da ottenere sempre
l'accensione e l'alimentazione
migliore. Inoltre questo stesso dato
viene inviato al cruscotto tramite linea
CAN, per la visualizzazione della
temperatura dell'acqua. È costituito
da un corpo nel quale è contenuto un
termistore di tipo NTC (NTC significa
che la resistenza del termistore
diminuisce all’aumentare della
temperatura).
Note
Per eseguire la prova di
funzionamento è necessario disporre
dello strumento di diagnosi “DDS”,
seguendo le indicazioni riportate al
paragrafo “Diagnosi guidata”
(Sez. D 5).
Smontaggio sensore
temperatura acqua
Per lo smontaggio del sensore di
temperatura acqua rimuovere la
carenatura sinistra (Sez. E 2) ed il
supporto batteria come spiegato in
questa sezione.
Scollegare il connettore del cablaggio.
Svitare il sensore (1) dal distributore
acqua (2).
Rimontaggio sensore
temperatura acqua
Operare con il procedimento inverso
allo smontaggio, bloccando il sensore
sul raccordo alla coppia di serraggio
prescritta (Sez. C 3) ed applicandogli
frenafiletti prescritto.
Rimontare la carena sinistra (Sez. E 2).
Sensore temperatura aria
Il sensore (1) posizionato sul lato
destro del cruscotto, rileva la
temperatura esterna dell’aria:
questo segnale arriva alla centralina
integrata nel cruscotto che la
visualizza ed attraverso la linea seriale
di comunicazione (Linea CAN) arriva
alla centralina controllo motore che lo
utilizza per effettuare eventuali
correzioni di mappa.
Coolant temperature
sensor
This sensor is mounted to
the horizontal head coolant outlet
fitting and measures the coolant
temperature. This information is sent
to the ECU and used to correct the
calibrations stored in the Flash Eprom
so as to ensure optimal ignition and
fuel supply. The same information is
sent to the instrument panel via the
CAN line for the coolant temperature
display. It comprises a housing
containing an NTC thermistor
(NTC means that the thermistor
resistance decreases as the
temperature increases).
Notes
To test the operation of the
coolant temperature sensor, use the
DDS tester and follow the instructions
given under the heading “Guided
diagnosis” (Sect. D 5).
Removing the coolant
temperature sensor
To remove the coolant temperature
sensor, first remove the LH side
fairing (Sect. E 2) and the battery
mount (as explained in this section).
Disconnect the wiring harness
connector.
Unscrew the sensor (1) from the
coolant manifold (2).
Refitting the coolant
temperature sensor
Refit by reversing the removal
operations, securing the sensor to
the union with the specified torque
(Sect. C 3) and applying the
recommended threadlocker.
Refit the LH side fairing (Sect. E 2).
Air temperature sensor
The sensor (1) is located on the
right-hand side of the instrument
panel and measures the external air
temperature:
this signal is sent to the instrument
panel ECU for display and sent over
the CAN line to the engine ECU which
uses it to make mapping corrections.
4
LOCK
1
Содержание Superbike 749R 2006
