Copyright 2021 Baker Hughes Company.
100 | DPI610E Instruction Manual–English
Chapter 6. Calibrator Tasks
STEP SIZE
value - is the magnitude of each step increment or decrement. When using this
option, it is expressed as a percentage. The resulting mA step size will be based on the step size
percentage of the LOW and HIGH value.
DWELL
- time interval which can be set to wait at each set-point value before changing to the
next value.
AUTO-REPEAT
- the tickbox option which allows the automation cycle to be repeated indefinitely
until manually stopped.
SCALING
- refer to Section 6.3.6 on page 122 for a description of the use of Scaling.
When selected, the
Percent Step
icon is displayed at the top right of the
CH2
window on the
calibrator screen.
The
Percent Step
sequence can be run manually by using the
UP
and
DOWN
nudge buttons to
increment and decrement the source values. It can also be automated by pressing the
automation
Play
softkey.
If selected in the configuration, the
Auto-repeat
icon appears next to the
Percent Step
automation
icon. The automation cycle is automatically repeated until manually stopped. To
stop the automation at any time, press the
Cancel
softkey.
4.
DEFINED STEP
The
DEFINED STEP
function allows incremental source values using a defined step size within
the span limits.The
LOW
,
HIGH
and
Step Size
value can be set as well as the option to auto-
repeat the automation process.
Step 1
From the
Source Automation
screen
tap the
DEFINED STEP
radio
button to
show the
Defined Step Automation
screen.
If required, select the
Edit
softkey to
change the selected automation values.
Click the
Proceed
icon to activate
the option and return to the
Calibrate
screen.