Copyright 2022 Baker Hughes Company.
16 | DPI 610E Instruction Manual–English
Chapter 1. Overview
1.9 Spares
For advice or technical support relating to spare parts, please contact:
1.10 Instrument Return
1.10.1 Returned Goods Procedure
If the unit requires calibration or is unserviceable, please return it to the nearest Druck
Service Centre listed at:
https://www.bakerhughes.com/druck
Contact the Service Centre to obtain a Return Goods Authorization (RGA). If you are in the USA,
obtain a Return Material Authorization (RMA).
Provide the following information on either a RGA or RMA:
•
Product code
•
Serial number
•
Details of defect/work to be undertaken
•
Error code(s) if applicable
•
Operating conditions.
1.10.2 Instrument Disposal
Do not dispose of this product as household waste. Use a Recycling Passport for the
product. This can be downloaded from the product web page:
. Use an approved organization that collects and/or
recycles redundant electrical and electronic equipment.
For more information contact either our Customer Service Department
(
https://www.bakerhughes.com/druck
) or your local government office.
1.11 Packaging For Storage or Transportation
1.11.1 Environment
The equipment must be maintained in the conditions shown in Table 1-5. This applies for both
shipping and storage.
Table 1-5: Conditions for Storage and Transportation
Condition
DPI 610-E
Mains Plug 149M43341
Outdoor use
Not for permanent installation
outdoors
For indoor use only
IP rating
IP54
IP20
Operating temperature
-10 to 50°C
-10 to 50°C
Storage and shipping temperature -20 to 70°C
-20 to 70°C
Altitude
-300 to 2000m
-300 to 2000m
Operating humidity
0 to 95% relative humidity (RH)
non-condensing
0 to 95% relative humidity (RH)
non-condensing
Pollution degree
1
1
