manualshive.com logo in svg

Dräger RW82, Инструкция по эксплуатации, Страница: 5 / 126

Поделиться
Скачать
Dräger RW82 Скачать руководство пользователя страница 5

PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04

i

Table of Contents

Section 1: Symbol Definition and Intended Use

Symbol Definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
Dictionary of Common Terms  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-5
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-7

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-7
Environment of Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-7
Indications/Contraindications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-7

Section 2: Introduction, Features, and Specifications

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1

Warmer Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
Cart/Bassinet (Resuscitaire Birthing Room Warmer (WBR82) and Cart only) . . . . . . . . . . . . .  2-1
Bassinet (Resuscitaire Radiant Warmer (RW82) only)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
Controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1
Blender Module (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-2
Resuscitation Module (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-2

Resuscitation Module with 15 mm Fitting with Internal Pressure Manometer 
(MU25175/MU25180) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-3
Resuscitation Module with 15 mm Fitting with External Pressure Manometer (MU25176) 2-5
Resuscitation Module with AutoBreath™ Infant Resuscitator (MU25178/MU25179). . . .  2-7
Suction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-9
Suction Line Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-10

Gas Supply Module (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-10
Apgar Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-10
Weigh Scale  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-10
Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11

High Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11
Check Patient  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11
Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11
Baby Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11
Power Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11
System Failure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-11
Blender Differential Bypass (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-12

Features of the Resuscitaire Birthing Room Warmer (WBR82)  . . . . . . . . . . . . . . . . . . . . . . . . . .  2-13
Features of the Resuscitaire Birthing Room Warmer without the Cart . . . . . . . . . . . . . . . . . . . . .  2-14
Features of the Resuscitaire Radiant Warmer (RW82). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-15
Features of the Resuscitaire Wall Mounted Radiant Warmer (WMRW82) . . . . . . . . . . . . . . . . . .  2-16

Содержание RW82































































































































Отзывы:

Нет отзывов