Docomo STYLE N-02A, Инструкция по эксплуатации

Страница: 424 / 602

422
Network Servic
es
2in1 function OFF
Rcv. avoid. setting …… Restrict incoming calls for
Number A and Number B.
Change rcv. avoid.
……
Set the Rcv. avoid.
setting for Number A and Number B.
Check rcv. avoid. …… Check the Rcv. avoid.
setting for Number A and Number B.
Mode link
……
Link the 2in1 Mode switching to
Rcv. avoid. setting. Number A incoming call is
accepted in A mode, Number B incoming call in
B mode, and both calls in Dual mode.
*When the function is active, the mode cannot
be switched with “ ” displayed.
Rcv. avoid. (abroad) …… Set the Rcv. avoid.
setting overseas (disabled when Mode link is
active).
Switching the phone number for each
call
When 2in1 is set to ON and the mode is set to Dual
mode, phone numbers can be switched when making
a call.
z
This function is available on the detail screen of
Phonebook/Received calls/Dialed calls/Redial.
<Example: To make a call using the phonebook>
1
Phonebook detail screen (p.87)
X
u
(FUNC)
X
“Dial setting”
X
“2in1/Multi Num.”
X
Select any
item:
Number A …… Allow calls to be made using
Number A.
Number B
……
Allow calls to be made using
Number B.
Cancel number …… Release the setting and allows
calls to made according to the Phonebook 2in1
setting.
N
z
When 2in1 is set to OFF, you can also configure
“2in1 setting” by pressing
2
for 1 second or
longer on the standby screen.
<Mode switching>
z
You can also switch modes by pressing
2
for 1
second or longer on the standby screen.
<Phonebook 2in1 setting>
z
Phonebook entries in B setting cannot be added
to the PushTalk phonebook.
z
When entries in the PushTalk phonebook are set
to B, a confirmation screen appears indicating that
PushTalk calls cannot be made.
z
You cannot set this function for UIM phonebook
entries.
z
Select “Display detail” from the function menu to
open the Phonebook detail screen from the
Phonebook list screen.
<Stand-by display>
z
When the mode is set to A mode, the standby
screen appears following “Display setting”.
z
When the pre-installed “
ダイレクトメニュー
”
(Direct Menu), downloaded Kisekae Tool, i-
α
ppli
standby screen or random display is set as the
standby screen, the default screen for each mode
appears even when “Same as Number A” is set.
<Disp. call/receive No.>
z
Names, phone numbers and mail addresses will
appear in the set color on the following screens:
• In-call
• Dialing/Receiving
• Redial/Dialed calls (list/detail)
• Received calls (list/detail)
• Sent
*
/Received addresses (list/detail)
• Chaku-moji Sent messages
*: In B mode, the Sent addresses screen cannot be
displayed.
z
The Number A/Number B (Address A/Address B)
setting applies to the ringing screen, etc. even
when 2in1 is set to OFF.
<Ringtone for Number B>
z
To set the same setting as Number A/Address A,
set each item to “Same as Number A”.
z
When the ring tone settings are duplicated, the
priority applies.
→ p.97
z
When you receive a call without caller ID on
Number B, the priority applies in the following
order:
① “V.phone (recv.)” in “Ringtone for Number B”
② “Call setting w/o ID”
③ “Voice call (recv.)” in “Ringtone for Number B”
N