Docomo STYLE N-02A, Инструкция по эксплуатации

Страница: 179 / 602

177
Mail
z
Area Mail cannot be received in the following cases:
• During i-mode
• During PushTalk
• During data communication
• During USB communication
• During Software Update
• During pattern data update
When You Receive Early
Warning “Area Mail”
<Receive Area Mail>
When the FOMA terminal is in the service area, Area
Mail is automatically received.
z
When you receive Area Mail, “ ” appears at the
top of the screen.
z
Vibrator works linking to ring tone and beep. As for
ring tone, Vibrator does not work when “Mail” under
“Vibrator” is set to “OFF”.
z
When Manner mode is set, the “Manner mode
setting” applies to the beep and ring tone linkage.
However, if “Original” manner mode is set, the ring
tone follows the mail ring volume setting, and the
beep sounds when the following items are set to
other than “Silent” or “OFF”:
• Record message • Phone Ring volume
• Mail Ring volume • Alarm Volume
• i-
α
ppli vol. • VM tone
• Keypad sound • LVA tone
z
When Manner mode is set, the “Manner mode
setting” applies to the vibrator. Regardless of the
“Manner mode setting”, the beep always works.
z
Messages are saved in the Inbox.
z
You can store up to 100 Area Mail in the FOMA
terminal.
●
When you receive Earthquake Early
Warning Area Mail
When receiving Area Mail, a screen with information
details appears, and notification is made with a
special ring tone and handset vibration.
Press
d
,
t
or
y
to return to the previous
screen.
z
The beep volume cannot be changed (fixed at
Level 6). The beep time can be set in “Beep time”
under “Area Mail setting”.
● When you receive Area Mail other
than Earthquake Early Warning
When you receive Area Mail, the “Receive Area Mail”
or the “Notice” screen appears, then the Area Mail
ring tone sounds (the screen is determined by the
sender).
The “Receive Area Mail” screen returns to the
previous screen if no operation is performed for a
given time or you press any key. Press
d
,
t
or
y
to change the notice screen to the previous
screen.
z
The ring tone volume is determined by “Mail” under
“Ring volume”.
Setting Early Warning “Area
Mail”
<Area Mail setting>
Configure Area Mail receive settings.
1
Mail Setting screen (p.173)
X
“Area
Mail setting”
X
Select any item:
Receive setting
……
Set whether to receive Area
Mail.
• A message appears asking whether to use Area
Mail. Read the notice carefully and select “Yes” or
“No”.
Receive entry …… Register “Area Mail name” (any
name) and “Message ID” (message ID issued by the
service provider) of the information you want to
receive except Early Warning. Select “<Not
recorded>” on the Receive entry screen, then enter
your security code to register. Early Warnings are
received regardless of the Receive entry setting.
Area Mail name
……
Enter any name.
Message ID …… Enter Message ID specified
by the service provider.
Beep time …… Set the beep time between 01 and
30 seconds.
N
z
If the storage capacity for Area Mail is full when
you receive Area Mail, Area Mail are deleted from
the oldest first in the trash box, oldest read Area
Mail and unread Area Mail.
N
z
The notice screen or “Receive Area Mail” screen
may not appear when you receive Area Mail in the
following cases:
• While Camera is active
• While i-
α
ppli is active
• In Public mode (Driving mode)
• While viewing/recording 1Seg
• While Alarm is active
• During streaming playback
• While a microSD card is being accessed