Docomo STYLE N-02A, Инструкция по эксплуатации

Страница: 136 / 602

134
Security
Settings
Disabling the Side Keys
<Side key guard>
Disable the sidekey (
@
,
a
( マナー ),
s
(
C
)) functions
available when the FOMA terminal is closed.
z
The side keys are enabled regardless of this setting
when:
• The FOMA terminal is open
• A flat-plug earphone/microphone with switch
(optional), etc. is connected
• PushTalk is in progress
1
i
X
w
(1 second or longer)
The side key operations are
disabled (“ON”) and “
”
appears.
■ To enable the side keys
when the FOMA
terminal is folded
X
Repeat Step 1
“ ” disappears.
Using Face Authentication
<Face authentication>
Capture your portrait and save the image name as a
keyword to be used if authentication fails for the following:
z
A dirty front camera lens may cause misoperation.
Clean with a soft cloth before capturing.
z
The rate of successful recognition may be reduced
depending on image conditions. Try the following to
improve the rate:
z
Face recognition technology does not totally
guarantee to recognize the user. Under no
circumstances shall DOCOMO be liable for any
loss or damage caused by use of this product by a
third party or lost opportunity to use this product.
1
i
X
“Settings/Service”
X
“Lock/
Security”
X
“Face authentication”
X
Enter your security code
2
“ON”
X
“OK”
The “New image” screen appears. Read
on-screen cautions carefully.
■ To validate the saved image
X
“ON”
■
To disable
X
“OFF”
X
“YES” or “NO”
3 Align the eye level with the
guiding frame
X
d
(Record)
X
d
(Save)
Shooting takes place three
times. An image is saved
after each shot.
If images are not saved,
shooting is canceled, or
fewer than three images are
captured, saved images are
deleted and no image is
registered.
After three images are saved, the “Edit image
name” screen appears.
■ To cancel shooting
X
t
X
“YES”
4 Enter an image name
X
“YES”
The entered image name is a keyword to be
used if authentication fails.
Enter 2 to 8 double-byte characters or 4 to 16
single-byte characters for the image name.
■
To change the image name
X
Select “NO” or the image name
5
Use
c
to select a checkbox ( □ )
X
o
(Finish)
The checked ( ) item can use the face
authentication. Deselect items you do not want
to authenticate.
• Releasing Keypad lock
• Releasing IC card lock
• Starting Reset settings • Starting Initialize
• Starting Face
authentication
Possible cause of low
recognition rate
Solution
There is too large a contrast
between bright and dark
parts of the face if the image
is captured under strong
light or in a dark place
without sufficient light Move to a location where
the face is evenly
illuminated.
The entire face is so
brightly illuminated so that
the image looks white
Important parts of the face
(eyes, nose, mouth or
eyebrows) cannot be
discerned because of hair,
eyeglasses or a mask Put your hair back and
take off eyeglasses or
mask so that eyes, nose,
mouth and eyebrows are
exposed.
Face authentication
Function menu
¨
p.135
New image