Docomo foma N905i, Руководство пользователя

Страница: 48 / 548

46
Before Using the
Handset
Turning the FOMA Terminal
On/Off
<Power ON/OFF>
z
When you start using the FOMA terminal for the
first time or if it has been left unused for a long time,
charge the battery.
Turning the FOMA terminal on
z
Before turning the FOMA terminal on, make sure
that the FOMA card (UIM) is inserted correctly.
1
y
(1 second or longer)
The standby screen or initial settings screen
appears. If you have just attached the battery
pack and you turn the FOMA terminal back on
immediately after turning it off, “WAIT A
MINUTE” message may appear for a short time.
■ When “ ” appears
You are outside the FOMA
service area or in a place
where radio waves do not
reach. Move to a place where
the radio reception level
indication such as “ ”
appears. The reception level
is displayed as follows:
■ When PIN1 code entry set is set to “ON”
The PIN1 code entry screen appears. → p.124
■ When “All reset total cost” is set to “ON”
The PIN2 code entry screen appears.
■
If the Initial setting screen appears
Specify the initial settings. → p.46
Turning the FOMA terminal off
1
y
(2 seconds or longer)
The shutdown screen “SEE YOU” appears and
the power is turned off.
Switching Display into
English
<Select language>
Function names and messages displayed on the
display and indicator display are toggled between
Japanese and English.
1
i
X
“ 各種設定 ”
X
“ ディスプレイ ”
X
“ バ
イリンガル ”
■
Switch from Japanese to English
X
”English”
■
Switch from English to Japanese
i X
“Settings”
X
“Display”
X
“Select language”
X
“ 日本語 ”
Setting the Default
<Initial setting>
After turning the FOMA terminal on, you can set “Set
main time”, “Change security code”, “Character size”,
“Permit to send loc.” and “Keypad sound” as initial
settings.
1 Initial setting screen
X
“YES”
2 Set the main time
Setting main time
→
p.47
3 Change the security code
The default setting is “0000”
(four zeros).
Changing Your Security Code
→
p.125
4 Character size
Character size → p.114
N
z
When you change the FOMA card (UIM), you have to
enter the 4 to 8 digit security code after turning on the
FOMA terminal. The standby screen appears when
the security code is successfully entered. When you
enter wrong security code for 5 times, the FOMA
terminal turns off (however, you can turn on the FOMA
terminal again).
Standby
Good Poor
N
z
When a FOMA card (UIM) is inserted, the “Select
language” setting is saved on the FOMA card (UIM).
z
If “Select language” is set to “English”, the options are
provided with “ON” and “OFF” for “Display” under
“Clock display” and “Info notice setting”.
z
Announcements can be played in English for some
services.
→
p.376
Initial setting
Ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
ＹＥＳ
ＮＯ
Ｓｔａｒｔ
ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
ＯＫ？