Docomo foma N905i, Руководство пользователя

Страница: 381 / 548

379
Ne
twork Services
Number Setting …… Registers the additional
number notified at the subscription of the Multi
number to the FOMA terminal.
X
Highlight the item to register (or change) the
additional number
X
o
(Edit)
X
Enter the
name
X
Enter the additional number
You can enter up to 8 double-byte or 16 single-byte
characters for the name and you can enter up to 26
digits for the additional number.
• About the function menu of the “Multi Number
setting” screen which appears when “Phone
number record” is selected.
→
p.379
Select ring tone …… Sets the ring tone for the
received calls to the additional number 1 and
additional number 2 respectively.
→ p.100
* : When the name is changed, registered name
appears respectively.
Multi Number setting screen
(p.379)
Edit
……
Edits the name of the basic number or the phone
number/name of the additional number.
Delete this …… Deletes the name of the basic number or
one phone number/name of the additional number.
Delete all …… Deletes the name of the basic number and
all phone numbers/names of the additional numbers.
Switching the phone number for each
call
You can switch the phone number each time you
make a call.
1
Enter phone number screen (p.50)
X
u
(FUNC)
X
“Multi Number”
X
Select
any item:
Basic Number
*
…… Sets to call from the subscribed
phone number (basic number).
Additional Number1/Additional Number2
*
……
Sets to call from the additional number.
Cancel number …… Cancels the setting and “Set
Multi Number” setting is applied.
* : If the registration name is changed, each name is
displayed.
2in1
<2in1>
You can separately use 2 phone numbers and 2 mail
addresses on your FOMA terminal as if you have 2
terminals.
z
In this function, your phone number and mail
address is called “Number A and Address A” and
the additional phone number and mail address is
“Number B and Address B”.
z
Cannot be used at the same time as Multi Number.
N
z
The Multi number settings (name, phone number, etc.)
in the FOMA terminal may be deleted if you remove or
replace the FOMA card (UIM). In this case, register
the additional number again.
<Number Setting>
z
The name appears when you make various settings of
the multi number function or when you select a phone
number to use for each call.
<Select ring tone>
z
Refer to p.101 for the priority when the ring tone
settings are duplicated.
N
z
You can also switch the phone number from the
function menu of phonebook detail screen, detail
screen of Redial/Dialed calls/Received calls records,
etc.
N
z
Information of Number B and Address B can be
obtained with the following operation.
• Number B: Run “Check 2in1” from the function
menu in the My Profile screen for Number B
→
p.348
• Address B: Run “Acquire Automatically” for the mail
address when registering My Profile for Number B
→ p.348
z
For more details, see “Mobile Phone User’s Guide
[2in1]”.
z
When sending a signal from an external device or AT
commands, Number A is used for A/Dual mode and
Number B is used for B mode.