Docomo foma N905i, Руководство пользователя

Страница: 439 / 548

437 Continued on next page
Appendix/
External
Device
s/Troubleshooting
“Not correspond contents”
●
The information acquired by the bar code reader includes content
not supported by this FOMA terminal, so it cannot be recognized.
ー
“Omakase lock is engaged”
●
Omakase lock is set. While Omakase Lock is set, all key
operations are locked except receiving a voice call/videophone
call and turning the power on/off. p.127
“Other function active Cannot
start”
“Other function active Cannot
operate”
●
This is displayed when you attempt an unavailable operation
when another function is running.
ー
“Out of service area”
●
This is displayed when you attempt to use an i-mode service
outside the service area, or where the radio waves do not reach.
Move to a place where “ ” is displayed, then use the i-mode
service.
p.46
“Page is not found (404)”
●
The site is not found. It may not exist.
ー
“Password is not correct (401)”
●
This is displayed when the authentication did not go through on
the “Authentication” or “Re-authentication” screen. Select “YES”
to retry authentication.
ー
“Please wait (packet)”
●
The packet communication device may be malfunctioning.
Otherwise, the packet communication network may be
congested. Retry later.
ー
“Please wait”
●
The voice line or packet communication device may be
malfunctioning. Otherwise, the voice line/packet communication
network may be congested. Attempt to use a voice call,
videophone call or i-mode later.
You can still make an emergency call (110, 119 and 118).
However, you may not be connected depending on the condition.
ー
“Preparing Cannot record”
●
Cannot record immediately after recording is finished. Retry later.
ー
“PushTalk is not usable in B
mode”
●
2in1 mode is set to B mode, PushTalk is not available. Change to
A mode, then proceed. p.380
“Receiving failed Channel
information cannot display”
●
This is displayed when you display the channel list screen for the
first time after purchase or when you attempt to display the
channel list screen after resetting the i-Channel, changing the
i-Channel host URL, initializing the FOMA terminal or exchanging
the FOMA card (UIM), and then if i-Channel information cannot
be obtained. Move to a location where “ ” is displayed, then
display the channel list screen again.
p.185
“Replay period has expired”
●
This is displayed when you select and attempt to run the desktop
icon for an i-motion which has finished its play duration or play
time limit.
ー
“Root certificate has expired Do
you connect?”
●
This is displayed when an SSL server certificate out of the validity
period has been received. Select “YES” to connect. Otherwise,
select “NO”.
●
This is displayed when there was a request for a client certificate
during connection to site of Internet page that uses SSL
communication.
ー
p.169
“Root certificate is not valid”
●
This message appears when you receive an SSL/TLS certificate
with the “Certificate” set to “Invalid”. Check the contents of the
certificate, set the certificate to valid and reconnect. p.181
“Root certificate is not valid”
●
This is displayed when a certificate is received that is rendered
invalid by Certificate settings. Check the content of the certificate,
then set it as valid before trying to reconnect. p.181
Error Message Explanation and Solution Ref. page