Docomo foma N905i, Руководство пользователя

Страница: 309 / 548

307 Continued on next page
Data Dis
play/Edit/Managem
ent
z
Note the following when you transfer the mail data:
• It may be impossible to receive part of the mail
subject, depending on the model of receiving
phone.
• When the i-
α
ppli launch information or mail-
connected i-
α
ppli information is pasted into the
mail, the mail is sent after the pasted data is
deleted. When the data attached to the mail is
set to “File restricted”, the mail is also sent after
the data is deleted. Also, a still image may be
deleted depending on the file format. However,
when sending sent mails or draft mails, the data
received via cable connection or copied from the
microSD memory card are sent even when they
are set to “File restricted”.
• When there is an attached file whose
downloading is not completed, the mail is sent
after the attached file is deleted.
• If there is not enough space in the Inbox when
receiving one received mail, mails are deleted
automatically in the order of mails in the Trash
and old received mails. However, unread mails,
protected received mails, i-mode mails and SMS
in the secret folder are not deleted. It is
recommended to protect mails you want to keep.
• If there is not enough space in the Outbox when
receiving one sent mail, the oldest unprotected
sent mail in the Outbox is overwritten.
• When receiving all the mails, the mails are
received after deleting all the mails and user-
created folders.
• You cannot transfer the received mail folder and
sent mail folder of the mail-connected i-
α
ppli. All
the mails in the folder are saved to the Inbox or
Outbox.
• The setting of “color coding” set in the received
mail list screen or sent mail list screen cannot be
transferred.
Session number
z
Transferring all requires the session number to
authenticate the sender and recipient. Before
sending or receiving, the sender and recipient
should agree on a 4-digit number as the session
number and then both enter the same number.
Forwarding Data with Infrared
Data Exchange
<Infrared data exchange>
When you forward data by Infrared
data exchange
z
Place the devices so that the Infrared data ports
are aligned on the same level and facing each
other. Also, do not place anything between the
devices or cover the Infrared data ports.
z
Use infrared communication within approximately
20cm. Do not move the devices until the
confirmation message about completing the
exchange appears.
z
The devices may not communicate successfully if
they are placed in direct sunlight, directly under a
fluorescent light, or close to other infrared
equipment.
Transferring one data at a time using
the Infrared data exchange
<Send/Receive Ir data>
You can exchange one data at a time with other
devices using the Infrared data exchange function.
●
Sending one data
Select “Send Ir data” from the function menu of Data
list screen or detail screen. If the data to send is a
JPEG image, High-speed Ir send (IrSS) can also be
selected.
<Example: To send one image>
1 My picture screen (p.274)
X u
(FUNC)
X
“Send Ir data” or “IrSS”
Appro
x. 20cm
or less
Within the
range of ±15°
Infrared data port