Docomo foma N905i, Руководство пользователя

Страница: 437 / 548

435 Continued on next page
Appendix/
External
Device
s/Troubleshooting
“Error Register forwarding
number”
●
This message appears when you have subscribed to the Call
Forwarding service and attempt to forward an incoming call by
selecting “Call Forwarding” from the function menu without setting
the forwarding number. p.374
“Eternal IC card not found”
●
This is displayed when the IC card authentication function was
used for user authentication, but authentication timed out and
failed. p.135
“Failed to Copy all”
●
Copying could not be complete, for some reason. Replace with a
different microSD card and try to copy again.
ー
“Failed to Copy this”
●
Copying could not be completed, for some reason. Replace with a
different microSD card and try to copy again.
ー
“For security, the i-
α
ppli standby
screen was canceled”
“Closed due to security error”
●
This is displayed when an i-
α
ppli or i-
α
ppli standby screen
(including i-
α
ppli DX) was closed because you attempted to
perform an unauthorized operation.
p.232
p.238
“Format microSD for your
phone”
●
There is an error such as a microSD memory card that has not
been initialized. Reformat the microSD memory card. p.301
“Input error (205)”
●
This is displayed after you input and send data from a site of
Internet homepage. Press
d
to cancel the input text or settings
(The set or input content has been sent, so this operation does
not cancel the transmission).
ー
“Insert the FOMA card (UIM)”
●
This is displayed when the UIM is not inserted correctly, or could
be broken. Check that the FOMA card is inserted correctly. p.39
“Interrupted because maximum
number of frames exceeded”
●
The webpage cannot be displayed because the frame count
exceeds the maximum that can be displayed on Full Browser or
picsel browser.
ー
“Invalid address”
●
The address contains a “,” and is invalid. Delete “,”.
●
Mail cannot be replied to because the address of the received
mail exceeds 50 single-byte characters.
●
SMS cannot be sent because the address includes characters
other than numerals, “#” and “
*
”. Delete characters and spaces
other than numerals, “#” and “
*
”.
ー
ー
ー
“Invalid URL”
●
This is displayed when you entered a URL using “Enter URL” or
“Home URL”, but it began with something other than “http://” or
“https://”, or you selected OK without any input. Enter the URL
again. p.172
p.180
p.264
“Is the ToruCa automatic
reading function in a mobile
phone used through the reader/
writer?”
●
This is displayed if you swiped the FeliCa mark over a reader with
“Auto reading setting” set to “OFF”. Select “YES” to use the
automatic reading function. p.246
“Limited Unable to view”
●
Cannot view limited broadcast.
ー
“Maximum size exceeded.
Cannot receive (452)”
●
This is displayed when data being received cannot be received
because it exceeds the maximum size.
ー
“Memory full Cannot move”
●
This is displayed when you try to move data out of a secret folder
but the destination folder is full. Delete data from the destination
folder, then move the data again. p.130
“Memory No. XXXX cannot
rewrite”
●
This is displayed when you are not in Secret mode or Secret data
only mode, but you try to register the same phone number as a
secret data memory number in the phonebook. p.127
“Memory shortage Quit”
●
The process is interrupted due to memory shortage. When you
are composing an i-mode mail, the number of tasks running and
the combination of characters may make it impossible to input as
many as 5,000 double-byte characters.
ー
Error Message Explanation and Solution Ref. page