Dionex ICS-3000, Руководство оператора

Страница: 134 / 392

ICS-3000 Ion Chromatography System
118
Doc. 065031-04 1/08
4.2 System Startup Checklist
†
Set up the eluent reservoirs (see page 123 )
†
Set up the piston seal wash system (see page 124 )
†
Start the pump (see page 127 )
†
Set the pressure limits (see page 130 )
†
If an EG is installed, start the EG and set the eluent concentration (see
page 131 )
†
Start the DC (see page 135 ) or TC (see page 137 )
†
Equilibrate the system and verify operational readiness (DC: see page 136 ;
TC: see page 138 )
†
Prepare the samples (see page 119 )
†
Fill the autosampler vials and load the sample tray (see page 120 )
Notes:
•
If the system is controlled by Chromeleon, you can use the SmartStartup
Wizard to create a startup program and sequence. SmartStartup allows
automatic system startup and equilibration.
•
The Start up button on the Home tab on the ICS-3000 panel tabset starts the
system components (pump, suppressor, eluent generator, CR-TC, detector,
etc.). The flow rate, suppressor current, and other settings that were in effect
when the system was shut down are restored.