Dionex ASE 100, Руководство оператора

Страница: 18 / 150

ASE 100 Operator’s Manual
2-4
Doc. 031842-01 5/02
2.1.2 Control Panel Keypad
Use the control panel keypad, in conjunction with the control panel screen
(see Section 2.1.1), to control ASE 100 operation.
Three of the control panel buttons (
START
,
RINSE
, and
STOP
) let you
directly control the most frequently used functions.
The four screen navigation buttons ( MENU , ENTER , the up arrow, and the
down arrow) are used in conjunction with the ASE 100 display to access
less frequently used functions. The action of the navigation keys depends
on whether the cursor is in normal mode or editing mode:
Button Function
Starts the currently selected method. The LED starts flashing
when the oven is within 5 °C of the set point. During the
method run, the LED is lighted, but does not flash. When the
method finishes running (or is aborted), three beeps are
emitted and the LED turns off.
Starts a rinse cycle in which about 5 mL of solvent is pumped
through the system. During the rinse cycle, the LED is
lighted. When the rinse cycle is complete (or is aborted),
three beeps are emitted and the LED turns off.
Note: Always install a rinse cell and a rinse bottle before
starting a rinse cycle; see Section B.2.6 for instructions.
Interrupts the currently running method or rinse cycle and
displays the
ABORT screen. Pressing the button lights the
LED. The LED turns off when you select an option on the
ABORT screen; see Section 3.6 for details.
In normal mode, the cursor does not blink and looks like
this.
In editing mode, the cursor blinks and looks like this.
You can edit any field that contains a blinking cursor.