Dinolift DINO 105TL, Руководство по эксплуатации

Страница: 48 / 82

DINO 105TL
48
If you have to turn open or tighten the attachment bolts, do not forget to
use bonding adhesive (tighten crosswise)
– check the chassis and the welded seams on it; especially around the turning device and
attachment points of the outriggers
– inspect the outriggers.
– check the tow-bar, in particular its attachment to the chassis and axle
–
lubricate the bearings of the boom and outrigger joints
18.9.8 Check the overrun
– attachment of the overrun
– clearance
– condition of the towball-coupling
– condition of the locking device
– check that the overrun brake mechanism moves freely:
- stop the lift
- push in the towball-coupling with its push rod
- the push rod and the tow-ball-coupling must return to their initial outer
position of themselves following the action of the gas cushion of the
hydraulic absorber
18.9.9 Inspection of the axle and the suspension
– check the attachment of the axle
– check condition of the rubber absorbers and the torsion arms
18.9.10 Inspecting the safety devices
- check the attachment and the condition of the limit switches externally (see point
"Operation of the safety devices")
– from the tow-bar (transport position of the platform, RK3)
– support outriggers (RK11, RK12, RK13 and RK14)