Dinolift DINO 105TL, Руководство по эксплуатации, Страница: 12 / 82

DINO 105TL
12
4.3 Description of the machine’s intended use
The Access Platform is exclusively intended for transferring people and tools, as well as for
acting as a work platform to the limit of its load-bearing capacity and reach (refer to the
table of Technical Specifications and Reach Diagram).
The intended use also covers:
- Following all the instructions in the Operating Instructions.
- Performance of the inspections and maintenance operations.
5 GENERAL SAFETY REGULATIONS
Make yourself familiar with these operating instructions before using the lift!
- Keep these operating instructions in the place reserved for them.
- Make sure that all users of the lift are familiar with these instructions.
- Advise new users and strictly follow all instructions given by the manufacturer.
- Make sure you clearly understand all instructions relating to the operational safety of
the lift.
Always use chocks under the wheels when disconnecting the lift from the car.
Only specially trained personnel with authorisation in writing from their employer and who
have good familiarity with the device and are at least 18-years old are allowed to operate
the lift
- The max. allowed load on the platform is one (1) person and at maximum fifty (50) kg of
additional load, however, the total load must not exceed one hundred thirty (130) kg.
- The platform may only be operated when the chassis is well supported and the wheels
are off the ground.
- The load-bearing capacity and the gradient of the ground must be taken into account
when supporting the chassis.
- Additional support plates of adequate size must be used under the outriggers when
working on soft ground. Only use such additional support plates on which the metallic
outriggers will not slide.
The lift may only be moved in the transport position. No persons or load are allowed on the
platform during the transportation.
The weather conditions, such as wind, visibility and rain, must always be taken into account
so that these factors will not adversely affect the safe performance of the lifting operations.
The lift must not be used if the temperature drops below -20°C or
the wind speed exceeds 12.5 m/s