Dinolift DINO 105TL, Руководство по эксплуатации, Страница: 50 / 82

DINO 105TL
50
On the rear axle: 270 Kpa (2,7 bar)
on the jockey wheel of the tow-bar: 250
Kpa (2,5 bar)
Wheel bolts: 90 Nm
18.9.13 Check the operating controls on the platform
– check the overall condition of the electric appliances inside the box and spray with
moisture repellent, if necessary
– check the cables
– test the sound signal (S10) and the emergency stop (S4)(see point "Operating controls
in the platform control panel UCB").
– test all movements
18.9.14 Warning stickers and adhesive tapes
- make sure that all the warning stickers and adhesive tapes are legible – replace if
necessary
18.9.15 Inspect the brakes and the driving device
– remove the wheels
– clean the brake system and check the settings
– check the free movement of the brake shoes the operation of their return springs
– replace any worn out linings
– check the condition of the driving device and lubricate the joints
– put the wheels in place and tighten the wheel bolts (90 Nm)
Check the bolts for tightness after about 100 km of driving.
– check the tyre pressure:
– check the free movement of the overrun
brake and the parking brake
– check the safety wire
18.9.16 Traffic lighting
- Check the condition of the lights and the reflectors
18.9.17 Anti-corrosion treatment
- Repeat the anti-corrosion treatment using e.g. Tectyl 210R anti-corrosion agent