Dinolift DINO 105TL, Руководство по эксплуатации

Страница: 34 / 82

DINO 105TL
34
4. Close the control centre cover on the work platform.
5. Turn the selector switch Q1 to the position OFF and disconnect the lift from the power
supply.
6. Lift the support outriggers.
- at first the rear support outriggers (do not damage the rear lights)
- then the front support outriggers (do not damage the jockey wheel)
7. Apply the parking brake.
8. Make sure that the driving device is disconnected.
17 CONNECTION TO THE TOWING VEHICLE
1. Lift up and push forward the ball-coupling handle (in the driving direction). Now the ball-
coupling is released.
2. Press the ball-coupling onto the towball using only a little force. The connection and
locking take place automatically.
- Clean and lubricate the ball-coupling regularly.
3. Connect the emergency stop wires and light plug to the vehicle. Check the cable for
chafing and the proper operation of the wire.
4. Carefully release the parking brake and make sure that its locking is in order and that
its handle stays in the lower position.
5. Lift up the jockey wheel to the transport position.
No load allowed on the platform during towing of the lift.
In particular, if you are parking or disconnecting the lift from the towing vehicle on a slope,
apply the parking brake as firmly as possible. After having applied the parking brake, push
the lift backward to make the reverse automatics release the brake shoes. The spring
cylinder pulls the parking brake tighter. Thus the brakes of the vehicle are again properly
on.
If you leave the lift standing for a longer period of time, for example over the winter, we
recommend propping it up to release any load from the wheels.
NOTE!
- Always ensure before towing:
o
transport position of the outriggers
o
locking of the ball-coupling
o
operation of the lights
o
parking brake
o
condition and pressure of the tyres
- rear axle 270 kPa (2.7 bar)
o
safety wire
o
locking of the brakes after transportation
o
attachment of the jockey wheel in its upper position