Dinolift DINO 105TL, Руководство по эксплуатации

Страница: 33 / 82

DINO 105TL
33
14 SPECIAL INSTRUCTIONS FOR WINTER USE
– the lowest allowed operating temperature of the lift is -20 °C.
– if the temperature is below zero, let the power unit run for a few minutes before starting
the movements
– start with a few movements to warm-up oil in the cylinders and to ensure proper
operation of the valves
– check that the limit switches and the emergency descent devices are operational and
clean (from dirt, snow, ice, etc.)
– protect the control panel and the platform from snow and ice whenever they are not in
use
ALWAYS KEEP THE LIFT FREE FROM DIRT, SNOW ETC.
15 MEASURES TO BE TAKEN AT THE END OF THE WORKING DAY
1. Retract the telescope boom completely.
2. Check that the platform is perpendicular to the boom.
3. Lower the boom/platform onto the support on the tow-bar.
1. if the platform is not in its lowest position, the limit switch on the transport support
prevents the operation of the support outriggers
4. Close the control centre cover on the work platform.
5. Turn the selector switch Q1 to position OFF.
6. Disconnect the lift from the power supply.
7. Always take the selector switch key with you, when you leave the lift.
16 PREPARING THE LIFT FOR TRANSPORT
1. Fully retract the telescopic boom.
2. Check that the platform is perpendicular to the boom.
3. Lower the boom/platform onto the support on the tow-bar.
- if the platform is not in its lowest position, the limit switch on the transport support
prevents the operation of the support outriggers