Dinolift DINO 105TL, Руководство по эксплуатации

Страница: 39 / 82

DINO 105TL
39
EVERY 50 HOURS
1. Bearings of the outrigger cylinders
2. Bearings of the outriggers
3. Bearings of the boom
4. Bearings of the platform
5. Bearings of the levelling cylinders
6. Bearings of the lifting cylinder
7. Sliding surfaces of the telescope
8. Jockey wheel slide and threads
9. Plain bearings of the driving device
TWICE A YEAR
10. Bearings of the telescope cylinder
11. Overrun brake - overrun
12. Turning device bearings and gear ring
NOTE! Greasing the turning bearing: 2 strokes/nipple
Lubricant Esso Beacon EP2 or equivalent
Moving parts of the mechanism of the outrigger limit switch system must be lubricated every
50 hours.
If necessary, apply a thin grease film on moving parts of the ball coupling.
Always lubricate the lift and apply a protective grease film immediately after the washing.
18.4 LONG-TERM STORAGE
Clean the machine carefully, lubricate it and apply protective grease to it before putting it
into storage for a longer period of time. Repeat the cleaning and lubrication procedures
while resuming the operation.
The periodic inspections must be executed following the steps described in the instructions.