background image

Please Read Before Operating Unit

Operating Manual

Service and All Spare Parts Available

The Eraser Company, Inc.

PO Box 4961

Syracuse, NY 13221, USA

Phone: (315) 454-3237  

Fax: (315) 454-3090

Website: www.eraser.com

E-mail: [email protected]

Bench Glo-Ring

®

 Infrared Heat Tool

Содержание Bench Glo-Ring AH2711

Страница 1: ...nit Operating Manual Service and All Spare Parts Available The Eraser Company Inc PO Box 4961 Syracuse NY 13221 USA Phone 315 454 3237 Fax 315 454 3090 Website www eraser com E mail info eraser com Bench Glo Ring Infrared Heat Tool ...

Страница 2: ...ontinuous element 120V 50 60Hz IH5513 3 76 2mmø diameter continuous element 120V 50 60Hz Element and Guard Sizes Dimensions of internal diameter of elements in closed position Most elements are available in intermittent and continuously rated duty cycles Intermittent elements heat up quicker and get hotter than continuous elements NOTE Continuous elements MUST be fitted if unit is to remain on for...

Страница 3: ...close the elements adjust the element temperature and pull or push the material to be heated through the elements resting the ends on the workpiece rests to keep the workpiece central in the elements Open the elements when all material has been heated and remove the workpiece from the top or side of the elements NOTE Continuous elements must be used when utilizing the triple element model CAUTION ...

Страница 4: ... cause risk of injury to persons CHECK DAMAGED PARTS Before further use of the tool a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function check for alignment of moving parts binding of moving parts breakage of parts mounting and any other conditions that may affect its operation A guard or other part that is d...

Отзывы: