Dinolift DINO 105TL, Руководство по эксплуатации

Страница: 58 / 82

DINO 105TL
58
- load regulation valve of the levelling system
•
put a load of about 80 kg on the platform
•
lift and lower the boom 4 - 5 times
•
make sure that the position of the platform does not change
- electric directional valves
•
operate all boom and turning movements and check that they all work properly and
that the movements stop as soon as the levers are released
- manually operated directional valves
•
check that the valves of the support outriggers and the driving device work properly
and no movements are executed while the spools are in the neutral position
- cylinders
•
lower the outriggers to the support position and check the condition of the piston
rods and the wiper rings
•
check the cylinders for external oil leaks
•
lift the boom into its upper position and check the condition of the piston rod and the
wiper ring of the lifting cylinder
•
check the condition of the piston rod and the wiper ring of the master cylinder in the
slave cylinder system
•
lower the boom and check the condition of the piston rod and the wiper ring of the
slave cylinder under the platform
- hoses
•
check the hoses for any leaks or chafing
- pipes
•
check that there are no dents, leaks, trace of corrosion or chafing at the clamps
•
check that the pipes are properly fastened
- connections
•
check the hose and pipe connectors for leaks
- inspect thoroughly the electric system
•
check that the control panel boxes are dry, clean and tight.
•
check the condition of the cable connections and their protection against moisture
•
check the condition and attachment of the limit switches
•
check the limit switch lead-throughs for tightness
•
check the connections of the electric valves
•
check the connections of the solenoid valves
•
perform visual inspection of all electric wiring
•
check the condition of the mains cable plug
•
check the condition of the electric motor.
•
check the operation of the fault current switch
- check the attachment points of the hydraulic cylinders
•
check the condition of the bearings and pins of the outrigger cylinders, and
the locking of the pins