Dinolift DINO 105TL, Руководство по эксплуатации, Страница: 28 / 82

DINO 105TL
28
12. Refer to the item “Daily inspections” in the task list for servicing.
13. With the boom slightly lifted and the telescope extended, make sure that the
platform does not lower by itself while the operating controls are not being used.
14. When working under cold weather conditions, let the engine run for a while
without load to increase the hydraulic oil temperature. Start the operations by driving
the movements carefully without load back and forth from the chassis control panel.
15. Move the platform to the work object
If several control levers are operated simultaneously, only the movement with the least
resistance will operate.
NOTE!
Lowering the platform to transport position: Always retract the
telescope completely before lowering the boom onto the
transport support.
DO NOT TAKE ADDITIONAL LOAD IN THE UPPER POSITION!
16. When moving the platform, remember the
following
– be careful of the high voltage power lines
– do not exceed the max. allowed lateral force (200N)
– do not touch open electric wires
– do not throw objects from the platform
– do not damage the lift
– do not take additional load in the upper position
– do not damage other devices
– do not load the platform vertically more than what is
allowed
17. When leaving the lift
- drive the lift to a safe position, preferably to the transport position
- switch off the power unit