Digitax M1 mdt, Установка и программирование

Страница: 38 / 84

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely con fi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
38
87
Percentage or cost in Prog-Date 5 - This is the percentage or the cost that will be applied during the date and me as programmed in Prog-
Date 5. The interpreta on as a percentage or as a cost depends on ques ons Q.88 to Q.95. In case of percentage consider Q.88 to Q.91, Q.93
and Q.95. Ques ons Q.92 and Q.94 should be answered with: NO. In case of cost consider Q.92 and Q.94. Ques ons Q.88 to Q.91, Q.93 and
Q.95 should be answered with: NO. The cost is given in the local currency with an accuracy of 1. The allowed value goes from 0 (min) to 65535
(max). See Q.273 and Q.274 for adding a
fi
xed decimal point. The percentage is given with an accuracy of 0.1. The allowed value goes from 0
(min) to 65535 (max).
0 - 65535
percentage/
cost
88
Increase unit-cost in Prog-Date 5
- Should the unit-cost (Q.8 to Q.10) in Prog-Date 5 be increased based on the percentage (Q.87)? No / Yes
89 Increase ini al-cost in Prog-Date 5 - Should the ini al-cost (Q.11) in Prog-Date 5 be increased based on the percentage (Q.87)? No / Yes
90 Decrease unit-distance in Prog-Date 5 - Should the unit-distance (Q.2 to Q.4) in Prog-Date 5 be decreased based on the percentage (Q.87)? No / Yes
91
Decrease unit-wai ng- me in Prog-Date 5 - Should the unit-wai ng- me (Q.5 to Q.7) in Prog-Date 5 be decreased based on the percentage
(Q.87)?
No / Yes
92
Insert as
fi
xed cost in Prog-Date 5 - When passing from HIRED to STOPPED in Prog-Date 5 should the parameter of Q.87 be inserted as a
fi
xed
cost ?
No / Yes
93
Insert as percentage in Prog-Date 5 - When passing from Hired to Stopped in Prog-Date 5 should the parameter of Q.87 be inserted as a
percentage?
No / Yes
94
Insert as
fi
xed cost in Prog-Date 5 with K1 - Passing from HIRED to STOPPED in Prog-Date 5 should the parameter of Q.87 be inserted as a
fi
xed cost pressing K1?
No / Yes
95
Insert as percentage in Prog-Date 5 with K1 - Passing from Hired to Stopped in Prog-Date 5 should the parameter of Q.87 be inserted as a
percentage pressing key K1?
No / Yes
PROG- DATE N. 6
96
Block-number in Prog-Date 6 : the block number (absolute) to be used during the date and hour programmed in Prog-Date 6. The allowed value
goes from 0 (min) to 62 (max).
0 - 62
97
Block-o
ff
set in Prog-Date 6 : the block o
ff
set (rela ve) to be used during the date and hour programmed in Prog-Date 6. The rela ve block o
ff
set
is the number of blocks to add to the current block number in order to obtain the new block number. The allowed value goes from 0 (min) to
62 (max). 0 - 62
98
Percentage or cost in Prog-Date 6 : this is the percentage or the cost that will be applied during the date and me as programmed in Prog-Date
6. The interpreta on as a percentage or as a cost depends on ques ons Q.99 to Q.106. In case of percentage consider Q.99 to Q.102, Q.104 and
Q.106. Ques ons Q.103 and Q.105 should be answered with: NO. In case of cost consider Q.103 and Q.105. Ques ons Q.99 to Q.102, Q.104
and Q.106 should be answered with: NO. The cost is given in the local currency with an accuracy of 1. The allowed value goes from 0 (min) to
65535 (max). See Q.273 and Q.274 for adding a
fi xed decimal point. The percentage is given with an accuracy of 0.1. The allowed value goes
from 0 (min) to 6553.5 (max).
0 - 65535
percentage/
cost
99 Increase unit-cost in Prog-Date 6 - Should the unit-cost (Q.8 to Q.10) in Prog-Date 6 be increased based on the percentage (Q.98)? No / Yes
100 Increase ini al-cost in Prog-Date 6 - Should the ini al-cost (Q.11) in Prog-Date 6 be increased based on the percentage (Q.98)? No / Yes
101
Decrease unit-distance in Prog-Date 6
- Should the unit-distance (Q.2 to Q.4) in Prog-Date 6 be decreased based on the percentage (Q.98)? No / Yes
102 Decrease unit-wai ng- me in Prog-Date 6 - Should the unit-wai ng- me (Q.5 to Q.7) in Prog-Date 6 be decreased based on the percentage (Q.98)? No / Yes
103 Insert as
fi
xed cost in Prog-Date 6 - When passing from HIRED to STOPPED in Prog-Date 6 should the parameter of Q.98 be inserted as a
fi
xed cost? No / Yes
104
Insert as percentage in Prog-Date 6 - When passing from HIRED to STOPPED in Prog-Date 6 should the parameter of Q.98 be inserted as a
percentage?
No / Yes
105
Insert as fi xed cost in Prog-Date 6 with K1 - Passing from HIRED to STOPPED in Prog-Date 6 should the parameter of Q.98 be inserted as a
fi
xed cost pressing K1?
No / Yes
106
Insert as percentage in Prog-Date 6 with K1 - Passing from HIRED to STOPPED in Prog-Date 6 should the parameter of Q.98 be inserted as a
percentage pressing K1?
No / Yes
PROG-D ATE N. 7
107
Block-number in Prog-Date 7
- The block number (absolute) to be used during the date and hour programmed in Prog-Date 7. The value goes
from 0 (min) to 62 (max).
0 - 62
108
Block-o
ff
set in Prog-Date 7 - The block o
ff
set (rela ve) to be used during the date and hour programmed in Prog-Date 7. The rela ve block
o
ff
set is the number of blocks to add to the current block number in order to obtain the new block number. The allowed value goes from 0
(min) to 62 (max).
0 - 62
109
Percentage or cost in Prog-Date 7 : this is the percentage or the cost that will be applied during the date and me as programmed in Prog-Date
7. The interpreta on as a percentage or as a cost depends on ques ons Q.110 to Q.117. In case of percentage consider Q.110 to Q.113, Q.115
and Q.117. Ques ons Q.114 and Q.116 should be answered with: NO. In case of cost consider Q.114 and Q.116. Ques ons Q.110 to Q.113,
Q.115 and Q.117 should be answered with: NO. The cost is given in the local currency with an accuracy of 1. The allowed value goes from 0
(min) to 65535 (max). See Q.273 and Q.274 for adding a
fi
xed decimal point. The percentage is given with an accuracy of 0.1. The allowed value
goes from 0 (min) to 6553.5 (max).
0 - 65535
percentage/
cost
110 Increase unit-cost in Prog-Date 7 - Should the unit-cost (Q.8 to Q.10) in Prog-Date 7 be increased based on the percentage (Q.109)? No / Yes
111
Increase ini al-cost in Prog-Date 7
- Should the ini al-cost (Q.11) in Prog-Date 7 be increased based on the percentage (Q.109)? No / Yes
112
Decrease unit-distance in Prog-Date 7
- Should the unit-distance (Q.2 to Q.4) in Prog-Date 7 be decreased based on the percentage (Q.109)? No / Yes
113
Decrease unit-wai ng- me in Prog-Date 7 - Should the unit-wai ng- me (Q.5 to Q.7) in Prog-Date 7 be decreased based on the percentage
(Q.109)?
No / Yes
114 Insert as fi xed cost in Prog-Date 7 - When passing from HIRED to STOPPED in Prog-Date 7 should the parameter of Q.109 be inserted as a fi xed cost ? No / Yes
115
Insert as percentage in Prog-Date 7 - When passing from Hired to Stopped in Prog-Date 7 should the parameter of Q.109 be inserted as a
percentage?
No / Yes
116
Insert as
fi
xed cost in Prog-Date 7 with K1 - Passing from Hired to Stopped in Prog-Date 7 should the parameter of Q.109 be inserted as a
fi
xed
cost pressing key K1?
No / Yes