Digitax M1 mdt, Установка и программирование

Страница: 56 / 84

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely con fi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
56
AITP Control Panel Applica on and AITP Features
This applica on is made as a ”control panel” to interface the AITP processor. It allows to view and edit current setup,
or to monitor all ac vi es that are under control of the AITP.
Is useful both as a system applica on and as a sample applica on for developers, because it completely uses the DLL
interface modules provided by Digitax to simplify the applica on development
Version Info and Hardware ID
This panel simply shows the hardware and so ware version of the AITP. It also shows the Hardware ID of the device,
that is a guaranteed unique ID of the device board. It can be read from the AITP using the AITP libraries.
EESetup – AITP con
fi
gura on
The AITP con
fi
gura on is saved internally in the microprocessor, but can be exported to a setup
fi
le. This
fi
le is called
“EESetup.ait”. From this panel you can export and save AITP con
fi
gura on to the EESetup
fi
le, or do the reverse, load-
ing an external EESetup
fi
le into the AITP microprocessor.
You can use the AITP Control Panel applica on to view and edit the con
fi
gura on that is inside the AITP, and when
the con
fi
gura on is completed you can export it to the EESetup
fi
le. A er that, to copy and ac vate the exported
con
fi
gura on to another M1 MDT device, is necessary simply to copy the setup
fi
le in the “\Hard Disk\SysApps\BOX”
folder of the target M1 MDT device, and restart it
.