Digitax M1 mdt, Установка и программирование

Страница: 37 / 84

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely con fi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
37
60
Insert as percentage in holiday- me - When passing from HIRED to STOPPED in holiday- me should the parameter of Q.54 be inserted as a
percentage?
No / Yes
61
Insert as
fi
xed cost in holiday- me with K1 - Passing from HIRED to STOPPED in holiday- me should the parameter of Q.54 be inserted as a
fi
xed cost pressing K1?
No / Yes
62
Insert as percentage in holiday- me with K1 - Passing from Hired to Stopped in holiday- me should the parameter of Q.54 be inserted as a
percentage pressing K1?
No / Yes
PR OG-DATE N. 3
63
Block-number in Prog-Date 3 - The block number (absolute) to be used during the date and hour programmed in Prog-Date 3. The allowed
value goes from 0 (min) to 62 (max).
0 - 62
64
Block-o
ff
set in Prog-Date 3 - The block o
ff
set (rela ve) to be used during the date and hour programmed in Prog-Date 3. The rela ve block
o
ff
set is the number of blocks to add to the current block number in order to obtain the new block number. The allowed value goes from 0
(min) to 62 (max).
0 - 62
65
Percentage or cost in Prog-Date 3 - This is the percentage or the cost that will be applied during the date and me as programmed in Prog-Date
3. The interpreta on as a percentage or as a cost depends on ques ons Q.66 to Q.73. In case of percentage consider Q.66 to Q.69, Q.71 and
Q.73. Ques ons Q.70 and Q.72 should be answered with: NO. In case of cost consider Q.70 and Q.72. Ques ons Q.66 to Q.69, Q.71 and Q.73
should be answered with: NO. The cost is given in the local currency with an accuracy of 1. The allowed value goes from 0 (min) to 65535 (max).
See Q.273 and Q.274 for adding a
fi
xed decimal point. The percentage is given with an accuracy of 0.1. The allowed value goes from 0 (min)
to 6553.5 (max).
0 - 65535
percentage/
cost
66 Increase unit-cost in Prog-Date 3 - Should the unit-cost (Q.8 to Q.10) in Prog-Date 3 be increased based on the percentage (Q.65) ? No / Yes
67 Increase ini al-cost in Prog-Date 3 - Should the ini al-cost (Q.11) in Prog-Date 3 be increased based on the percentage (Q.65)? No / Yes
68 Decrease unit-distance in Prog-Date 3 - Should the unit-distance (Q.2 to Q.4) in Prog-Date 3 be decreased based on the percentage (Q.65)? No / Yes
69
Decrease unit-wai ng- me in Prog-Date 3 - Should the unit-wai ng- me (Q.5 to Q.7) in Prog-Date 3 be decreased based on the percentage
(Q.65)?
No / Yes
70
Insert as
fi
xed cost in Prog-Date 3 - When passing from HIRED to STOPPED in Prog-Date 3 should the parameter of Q.65 be inserted as a
fi
xed
cost?
No / Yes
71
Insert as percentage in Prog-Date 3 - When passing from HIRED to STOPPED in Prog-Date 3 should the parameter of Q.65 be inserted as a
percentage?
No / Yes
72
Insert as fi xed cost in Prog-Date 3 with K1 - Passing from HIRED to STOPPED in Prog-Date 3 should the parameter of Q.65 be inserted as a
fi
xed cost pressing K1?
No / Yes
73
Insert as percentage in Prog-Date 3 with K1 - Passing from HIRED to STOPPED in Prog-Date 3 should the parameter of Q.65 be inserted as a
percentage pressing K1?
No / Yes
PRO G-DATE N. 4
74
Block-number in Prog-Date 4 - The block number (absolute) to be used during the date and hour programmed in Prog-Date 4. The allowed
value goes from 0 (min) to 62 (max).
0 - 62
75
Block-o
ff
set in Prog-Date 4 - The block o
ff
set (rela ve) to be used during the date and hour programmed in Prog-Date 4. The rela ve block
o
ff
set is the number of blocks to add to the current block number in order to obtain the new block number. The allowed value goes from 0
(min) to 62 (max).
0 - 62
76
Percentage or cost in Prog-Date 4 - This is the percentage or the cost that will be applied during the date and me as programmed in Prog-
Date 4. The interpreta on as a percentage or as a cost depends on ques ons Q.77 to Q.84. In case of percentage consider Q.77 to Q.80, Q.82
and Q.84. Ques ons Q.81 and Q.83 should be answered with: NO. In case of cost consider Q.81 and Q.83. Ques ons Q.77 to Q.80, Q.82 and
Q.84 should be answered with: NO. The cost is given in the local currency with an accuracy of 1. The allowed value goes from 0 (min) to 65535
(max). See Q.273 and Q.274 for adding a
fi
xed decimal point. The percentage is given with an accuracy of 0.1. The allowed value goes from 0
(min) to 6553.5 (max).
0 – 65535
percentage/
cost
77 Increase unit-cost in Prog-Date 4 - Should the unit-cost (Q.8 to Q.10) in Prog-Date 4 be increased based on the percentage (Q.76)? No / Yes
78 Increase ini al-cost in Prog-Date 4 - Should the ini al-cost (Q.11) in Prog-Date 4 be increased based on the percentage (Q.76)? No / Yes
79 Decrease unit-distance in Prog-Date 4 - Should the unit-distance (Q.2 to Q.4) in Prog-Date 4 be decreased based on the percentage (Q.76)? No / Yes
80
Decrease unit-wai ng- me in Prog-Date 4 - Should the unit-wai ng- me (Q.5 to Q.7) in Prog-Date 4 be decreased based on the percentage
(Q.76)?
No / Yes
81
Insert as fi xed cost in Prog-Date 4 - When passing from HIRED to STOPPED in Prog-Date 4 should the parameter of Q.76 be inserted as a fi xed
cost?
No / Yes
82
Insert as percentage in Prog-Date 4 - When passing from HIRED to STOPPED in Prog-Date 4 should the parameter of Q.76 be inserted as a
percentage?
No / Yes
83
Insert as fi xed cost in Prog-Date 4 with K1 - Passing from HIRED to STOPPED in Prog-Date 4 should the parameter of Q.76 be inserted as a fi xed
cost pressing K1?
No / Yes
84
Insert as percentage in Prog-Date 4 with K1 - Passing from HIRED to STOPPED in Prog-Date 4 should the parameter of Q.76 be inserted as a
percentage pressing K1?
No / Yes
PROG -DATE N. 5
85
Block-number in Prog-Date 5 - The block number (absolute) to be used during the date and hour programmed in Prog-Date 5. The allowed
value goes from 0 (min) to 62 (max).
0 - 62
86
Block-o
ff
set in Prog-Date 5 - The block o
ff
set (rela ve) to be used during the date and hour programmed in Prog-Date 5. The rela ve block
o
ff
set is the number of blocks to add to the current block number in order to obtain the new block number. The allowed value goes from 0
(min) to 62 (max).
0 - 62