Figure 5–32 International Power Distribution Box
M R - 0 0 4 5 - 9 3 D G
Access Hole
DEC Power Bus
Switch
Circuit Breaker
AC Power
Connector
AC Power
Outlets (6)
Hex
Screws
Hex
Screws
Table 5–22 Power Distribution Box Removal Procedure
Step
Action
1
Turn off any devices connected to the power distribution box.
2
Set the circuit breaker to the off position. See Figure 5–31 or Figure 5–32.
3
Set the DEC power bus switch to the local position. See Figure 5–31 or
Figure 5–32.
4
If you are removing a domestic power distribution box, disconnect the ac power
cable from facility power. See Figure 5–31.
If you are removing an international power distribution box, disconnect the
ac power cable from the ac power connector and from facility power. See
Figure 5–32.
5
Disconnect any ac power cables connected to the ac power outlets and route the
cables through the access hole. See Figure 5–31 or Figure 5–32.
6
Remove the four hex screws that secure the power distribution box in the
cabinet. See Figure 5–31 or Figure 5–32.
7
Remove the power distribution box from the cabinet.
Error Handling and Analysis 5–43
