Digital Equipment LGplus Series, Руководство по установке

Страница: 60 / 194

3–12
Changing Parameters
CONFIG. CONTROL PRINTER CONTROL
Unidirectional
Disable*
Enable
* = Factory default
PMD Fault
Enable*
Disable
Slow Paper
Slew
Disable*
Enable
....
Power Saver
Time
15*
(15–60 min.)
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. Your print jobs may require
different parameter settings from the default that is provided. This section
provides an example procedure for changing and saving individual parameter
values.
The following procedure shows how to change and save the settings for the
Unidirectional option. Use these basic guidelines to navigate the
configuration menus and change other parameters.
If you think that the configuration for your printer has already been changed
from the default, you should load the default configuration before starting
this procedure (see page 3–19 ).
NOTE: If you are going to change and save parameters for both the LG and
the LinePrinter Plus emulations, remember to save your changes for
the LG emulation before you select LinePrinter Plus as the active
emulation (or vice versa). Once you change active emulations, any
changes to the previously selected emulation will be gone unless
they have been saved.