Digital Equipment LGplus Series, Руководство по установке

Страница: 114 / 194

4–44
Latch Data On
The Latch Data On parameter specifies whether the data is read on the
leading or trailing edge of the data strobe signal.
•
Leading (the default)
•
Trailing
Prime Signal
Determines whether the parallel port will perform a warm start if the host
asserts the Prime Signal.
•
Enable (default, a warm start will occur)
•
Disable (a warm start will not occur)
TOF Action
TOF (Top-of-Form) Action determines whether or not a form feed is
performed before a warm start when the prime signal is asserted from the
host. This setting is used only if the Prime Signal parameter is enabled.
•
Reset (the default, form feed on reset)
•
None (no form feed on reset)
Buffer Size in K
This option configures the amount of memory allocated for the Centronics
parallel port buffer. The default is 8 Kbyte, but you may specify between 1 and
16 Kbytes, in 1–Kbyte increments.