Digital Equipment LGplus Series, Руководство по установке

Страница: 47 / 194

2–25
Test the Printer
Step Key Result Notes
1.
Make sure that the printer top cover is open and the forms thickness lever is closed.
2.
Press:
ON LINE
OFFLINE
CONFIG. CONTROL
The printer must be
off-line to test the printer.
3.
+
ENTER SWITCH
UNLOCKED
OFFLINE
CONFIG. CONTROL
Allows you to make
configuration changes.
4.
UNTIL
OFFLINE
DIAGNOSTICS
5.
DIAGNOSTICS
Printer Tests
6.
Printer Tests
Shift Recycle*
7.
To start
test:
R/S
Printer Tests
Shift Recycle*
The printer outputs a
sliding alphabet pattern.
8.
To stop
test:
R/S
Printer Tests
Shift Recycle*
Stops test.
9.
+
ENTER SWITCH
LOCKED
Locks the configuration
parameters.
10.
CLEAR
OFFLINE
CONFIG. CONTROL
Moves the printer out of
the menus to offline.
11.
Examine the print quality. The characters should be fully formed and of uniform density. If the
test does not run or characters appear malformed, contact your Digital Customer Service
Engineer.
12.
If the print quality is good, close the printer cover; press ON LINE to enable printing. To select an
emulation and configure the printer with the control panel, go to Chapter 3.