Digital Equipment LGplus Series, Руководство по установке

Страница: 84 / 194

4–14
Margins will automatically adjust so that left/right and top/bottom margins can not cross one another.
NEXT increases, PREV decreases.)
Setting the top margin (LINES/LPI) does not affect the bottom margin.
(5) DP = Data Processing
CORESPON = Correspondence
COMPRESS = Compressed
OCR = Optical Character Recognition
(6) First number is characters per inch (cpi). Second number is lines per inch (lpi).
For example, DP 10 6 is Data Processing font at 10 cpi and 6 lpi.
HS = High Speed
Setting the bottom margin value (LINES/LPI) automatically resets the top margin to zero. (2)
(3)
Status reports are only sent when the serial interface is selected.
(7)
n = 0 to 13.2 inch in increments of 0.1 inch. (Press DOWN to change units : (4)
Vertical margins are specified in lines from 0–198 lines, assuming 6 lines per inch (LPI), or 0–33 inches. (1)
NOTES FOR LG MENU DIAGRAM
(Press DOWN to change units: NEXT increases, PREV descreases.)
LG Font Submenu
This options for this submenu select a default font style and character set for
the LG emulation, as follows:
•
Font Style. This option allows you to specify a print quality that
includes a characters per inch (cpi) and lines per inch (lpi) setting, in the
format Type cpi lpi. The default setting is DP 10 6. The print quality
types you may choose from are as follows:
DP = Data Processing (standard quality)
CORESPON = Correspondence (near letter quality)
COMPRES = Compressed (vertically compressed for printing
long graphs and charts)
OCR A & OCR B = Optical Character Recognition, sets A and B
HS = High Speed (Draft quality for high speed printing)
•
Font Character Set. This option allows you to select a character set.
The character set you select can be any of the Digital Multinational sets,
which include the U.S. ASCII set and several foreign language and
special character sets (listed in Figure 4–4).