Digital Equipment LGplus Series, Руководство по установке

Страница: 46 / 194

2–24
NOTE: The first print line on the form should be 1/2 inch or more from the
perforation for best print quality.
Thin Paper
Medium Paper
Thick Paper
Figure 2–21. Lowering the Forms Thickness Lever
7. Lower the forms thickness lever. Set it to match the paper thickness.
(The A–B–C scale corresponds approximately to 1–, 3–, and 6–part
paper thickness. Adjust until you have the desired print quality.).
NOTE: Do not set the forms thickness lever too tightly; excessive friction
can cause paper jams, ribbon jams with potential for ribbon damage,
smeared ink, or wavy print.
8. Press SET TOF. The top–of–form position that you have set moves down
to the print position.
IMPORTANT
The forms thickness lever must be closed; otherwise, there will be no
paper movement when you press SET TOF.
9. Go on to the next procedure to run a simple printer test.